GA-5LXWL-RH Motherboard
Quick Power On Self Test
This category speeds up Power On Self Test (POST) after you power on the computer. If it is set
to Enable, BIOS will shorten or skip some check items during POST.
Enabled
Disabled
First / Second/ Third Boot Device
Select the first/second/t\hird boot device
Floppy
LS120
Hard Disk
CDROM
ZIP100
USB-FDD
USB-ZIP
USB-CDROM
LAN
Disabled
Boot Menu
Select the specified boot device priority.
Enabled
Disabled
Boot Up Floppy Seek
During POST, BIOS will determine the floppy disk drive installed is 40 or 80 tracks. 360K type is
40 tracks 720K, 1.2M and 1.44M are all 80 tracks.
Enabled
Disabled
Enables quick POST.(Default setting)
Normal POST.
Select your boot device priority by Floppy.
Select your boot device priority by LS120.
Select your boot device priority by Hard Disk.
Select your boot device priority by CDROM.
Select your boot device priority by ZIP100.
Select your boot device priority by USB-FDD.
Select your boot device priority by USB-ZIP.
Select your boot device priority by USB-CDROM.
Select your boot device priority by LAN.
Select your boot device priority by Disabled.
Enable the specified boot device.
Disable the specified boot device.
BIOS searches for floppy disk drive to determine it is 40 or 80 tracks. Note
that BIOS can not tell from 720K, 1.2M or 1.44M drive type as they are all
80 tracks. (Default setting)
BIOS will not search for the type of floppy disk drive by track number. Note
that there will not be any warning message if the drive installed is 360K.
3 4