SRM Training System User Manual page 9

Power Heartrate
Real-Time
Hold for 3
Seconds
1. From the Real-Time Screen, hold PRO for 3 seconds to enter pairing mode where you
will synchronize the PowerControl with the PowerMeter, Speed Sensor, and Heart Rate
monitor. Scroll through the different wireless device options with the MODE button.
Device must be activated and transmitting by spinning crank or wheel before pairing.
2.
Once you are on the screen for the device you would like to pair, press SET. An an-
tenna will begin blinking in the lower right corner. Once your device is detected,
"Found" will be flashing on the screen.
Power= SRM PowerMeter
Heartrate Suunto= Suunto Dual HR Strap
Heartrate Plus= Garmin HR Strap
SRM POWERCONTROL
Pairing/Synchronizing
Speed Duo-Trap Speed
Speed Suunto= Suunto QR Front Wheel Skewer
Speed Plus= SRM VDO Speed Pod (fork or chainstay)
Speed DUO S= Duo-Trap Speed ONLY
Speed/Cadence DUO SC= Duo-Trap
8
Duo-Trap Speed/Cadence