Installing Your Webcam - Micro Innovations IC825C User Manual

Installing Your Webcam

Install Software First before attaching the webcam to your PC.
In order for your webcam to function properly, you must install the DRIVER. You can install the
Ulead software at a later time.

Choosing the DRIVER Only Installation.
This will install the basic software to operate your webcam. This will allow you to use your webcam
will many popular Internet video chat applications. After installing the DRIVER, simply launch your
favorite video chat program to begin use.
During the installation you will be prompted to restart your PC. When instructed to connect your
webcam, insert the USB connector into an available USB port on your PC.
Wait until your PC has finished detecting your webcam. Your PC will make the proper settings to
operate your webcam. Complete the webcam installation.
To Uninstall the DRIVER:
Click Start ⇒ Programs ⇒ Motion Track Webcam
To view the User's Manual for the Motion Track Webcam:
⇒ ⇒ Motion Track
Click Start Programs
Frequently check for updated webcam software by visiting our website, www.microinv.com.
⇒ Uninstall
⇒
Webcam User's Manual
5
.
To use the microphone
connect the 3.5 mm
connector to an available
audio jack.