Page 2
Consult a service representative for help. Properly shielded and grounded cables and connectors must be used in order to comply with FCC emission limits. Micro Innovations is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.
Welcome Congratulations on the purchase of your new Micro Innovations Webcam Matrix. This manual will help guide you through the setup process and answer any questions you may have regarding your webcam . Package Contents Micro Webcam Matrix USB Connector Warranty Information User’s Manual...
INSTALLING THE CAMERA NOTE: Please insert the CD-ROM and install the driver and software before plugging in the camera! Software Installation STEP 1 - Insert the CD into your CD-ROM drive. The Setup Wizard will appear on your computer screen. Note: If the Setup Wizard does not appear, click Start and select Run.
Page 6
Camera Care Keep all beverages away from the camera working area and avoid any spills. Maintaining your Micro Webcam Matrix will ensure longer life and will minimize the chances of causing damage to your camera and computer. There are no user...
Troubleshooting If your camera is not recognized in Windows, be sure to check that the USB connector is securely connected into the back of your computer. You may have installed the driver with the camera plugged in. Uninstall the driver, unplug the camera, and then reinstall the driver.
Helpful Hints The following hints will help you achieve the best results with your Micro Webcam Matrix: Camera placement Position the camera so that the subject is centered. Place the camera on a steady surface. Lighting Use sufficient lighting. Place the light source behind the camera and facing the subject. Maintain a consistent lighting environment, i.e.
Page 9
Focus For a sharper image, adjust the focus of your Micro Webcam Matrix by rotating the focus ring located on the front of your camera. Maintenance Keep the camera away from moisture and extreme temperature. Never use harsh or abrasive cleaners or organic solvents on the camera or on any of its parts.
Innovations to the purchaser with respect to the product and shall constitute full satisfaction of all claims, whether based on contract negligence, strict liability or otherwise. In no event shall Micro Innovations be liable or in any way responsible, for any incidental of consequential economic or property damage. Some states do not allow the exclusion of incidental or consequential damages, so the above exclusion may not apply to you.