Page 1
Before installing device it is recommended that your operating system contain the most recent updates and service packs available. Install the software first before connecting the webcam to your PC. You will be prompted to restart your PC during this installation. Close and save all work before installing this device. Model IC435C...
Page 2
Consult a service representative for help. Properly shielded and grounded cables and connectors must be used in order to comply with FCC emission limits. Micro Innovations is not responsible for any radio or television interference caused by using other than recommended cables and connectors or by unauthorized changes or modifications to this equipment.
Welcome Congratulations on the purchase of your new Webcam. The Webcam is compatible with IBM® or compatible PCs with an available USB port. It is supported by Windows® 98SE, Me, 2000, XP, Vista™. Feature Benefits: • Includes Arcsoft® Photo & Video Editing Software •...
Installation Procedures During the software installation, you must install the DRIVER. You can install the Arcsoft® PhotoImpression and VideoImpression software at a later time. Frequently check for updated webcam software by visiting our website, www.microinv.com. Turn on your computer. Note: In order for you to use your webcam you must install the software before plugging the webcam into your PC.
Note: You can limit the size of the video capture size by clicking “File” and choosing “Allocate File Space”. Enter the amount of disk space to be used in the capture size field. Any video (data) that exceeds the allocated size will be lost. Micro Innovations Webcam. Make sure that “Webcam” is checked under the...
Using Arcsoft PhotoImpression Click the Icon on your desktop or click Start displayed on your screen. • Choose the Camera/ Scanner Icon • Using the “View Mode” located in the upper right-hand corner of the applications window, you can view your photos accordingly.
Capturing Images from “Live” Video Click the Icon on your desktop or click Start From the “Get Photo” control Panel, choose the Video Icon will appear with the following options: • Source: allows you to modify the Video Camera capture properties and settings such as Brightness, Hue, Saturation, White Balance, Exposure and Light Frequency.
Using Arcsoft VideoImpression Click this Icon on your desktop or click Start The “getting Started Wizard” will appear. The following options will be available for you to choose from: Programs Arcsoft Videoimpression. Once the applications is opened, Open an existing Project – Lets you browse your system for existing project files.
Troubleshooting Problem “No capture device found” error “Camera not connected” error Webcam image is blurry Webcam image is too dark (Black or green screen) Make sure you have connected the webcam correctly into the USB port or try a different USB port on your PC. There may be a conflict with previous camera/scanner software installed on your PC.
Never use harsh or abrasive cleaners or organic solvents on the webcam or on any of its parts. • Never disassemble or touch the inside of the webcam. Only Micro Innovations may service or repair this device. For technical assistance visit www.microinv.com or call toll free: 1-877-550-5534.