Table of Contents
Advertisement
If you change your base station PIN
keep a record of the new number by
writing it in the space provided on
page 7.
Please note that when you enter your
base station PIN it will not be shown
on the display for security reasons.
Press the
button. The display
will show REDIAL.
Press the
button until the
display shows BS SETTINGS.
✔
Press the
button.
The display will show AUDIO.
Press the
button until the
display shows CHANGE PIN.
✔
Press the
button.
The display will show a flashing
cursor and ENTER PIN.
Enter the current PIN (factory
setting 0000).
✔
Press the
button to confirm.
The display will show a flashing
cursor and NEW PIN.
Enter the new PIN.
✔
Press the
button to confirm.
The display will show a flashing
cursor and REPEAT.
Enter the new PIN again.
✔
Press the
button to confirm. You
will hear a confirmation beep.
The display will show STORED and
then CHANGE PIN.
✘
Press the
button until you return
to the standby screen.
In the event of a malfunction or lockup,
remove the power from the base for 30 seconds
and then re-apply. This will reactivate the
base station. Please wait for the handsets to
reconnect before use.
If you experience any difficulties with your
Freestyle 2010, please contact the Freestyle
Helpline on
bt.freestyle.helpdesk@vtecheurope.com
or email
30
Advertisement
Table of Contents
