Page 1
BT Converse 2100 User Guide Corded Phone...
Page 2
• Adjustable ringer volume. * BT 1571 or similar network voicemail users can also use this feature, however the indicator light will not flash. New voicemail messages will be indicated by a stuttered dial tone when you pick up the handset.
Page 3
Just follow the simple instructions on the next • Wall mounting plugs and screws few pages. Hearing aid friendly The BT Converse 2100 is fitted with an inductive coupler so it is compatible btplc.com/inclusion/ with hearing aids. Please visit for further practical advice on using hearings aids.
M1-M3 memory buttons Store/replace a one touch number ........10 Dial a one-touch memory number ........10 Storing a pause in a number ..........10 Delete a stored number ............10 If you need some help, go to bt.com/producthelp or call us on 0800 145 6789*.
WARNING Do not place your BT Converse 2100 in the You need to place your BT Converse 2100 within 3 metres of a telephone socket bathroom or other humid areas. so that the cable will reach. Your BT Converse 2100 can be wall mounted, Other electrical equipment close to your Converse could have an adverse effect on call quality.
Please visit btplc.com/inclusion/ for further practical advice on using hearings aids. * The light will only flash if your BT Converse is connected to a PBX switch or similar. The light will not flash when used with network services such as BT 1571.
The redial number can up to 32 digits long. If the last number dialled was longer than 32 digits, only the first 32 digits will be dialled. 1. Lift the handset, or press , then press If you need some help, go to bt.com/producthelp or call us on 0800 145 6789*.
If in doubt, please refer to your PBX instructions/manager for the correct procedure to access this service. If you need some help, go to bt.com/producthelp or call us on 0800 145 6789*.
Amplify 1. Press to switch the handset earpiece volume between After you hang up, the volume will automatically return to Normal volume. Normal and High. If you need some help, go to bt.com/producthelp or call us on 0800 145 6789*.
Mute light flashes. 3. Press the memory button again to delete the stored number. You hear a confirmation beep. 4. Replace the handset or press If you need some help, go to bt.com/producthelp or call us on 0800 145 6789*.
Phone ringer does not ring Is the ringer volume switch set to O? Move the ringer volume switch to 1 or 2, see page 9. If you need some help, go to bt.com/producthelp or call us on 0800 145 6789*.
• When not in use, store in a dry place and away from extreme heat recommended repair agent Discount Communications on or cold 0800 980 8999 or a local qualified repairer. If you need some help, go to bt.com/producthelp or call us on 0800 145 6789*.
– for example, if asked to enter a code number. To switch to tone dialling during a call, press If you need some help, go to bt.com/producthelp or call us on 0800 145 6789*.
Using the handset park when the phone is wall-mounted If you need to leave the phone whilst on a call, hang the handset on the handset park at the top of the base. If you need some help, go to bt.com/producthelp or call us on 0800 145 6789*.
Need help?
Do you have a question about the Converse 2100 and is the answer not in the manual?
Questions and answers