Table of Contents
Advertisement
Adjusting the height of the upper basket
If washing very large plates (over 27 cm and up to 31 cm in diameter) you can load them in
the lower basket after moving the upper basket to the higher position.
To move to the higher position proceed as
follows:
1. Move the front runner stops (A) of the upper basket
outwards and slide the basket out.
2. Refit the basket in the higher position and replace the
stops (A) in their original position.
Attention!
When the top basket is in the higher position it will only take plates up to 20 cm in
diameter and you will not be able to use the raised cup racks.
After loading your machine always close the door, as an open door can be a
hazard.
RC01
15
Advertisement
Table of Contents
