AOpen AX6BC User Manual page 71

PCI Slot Location 1
(pin A6)
Slot 1 INTA
Slot 2 INTB
Slot 3 INTC
Slot 4 INTD
Slot 5 (if any) INTD
PNP/PCI Configuration
Assign IRQ for USB
Enabled
Disabled
PNP/PCI Configuration
Used MEM Base
Addr
N/A
C800
CC00
D000
D400
D800
DC00
PNP/PCI Configuration
Used MEM Length
8K
16K
32K
64K
Location 2
(pin B7)
INTB
INTC
INTD
INTA
INTA
Assign IRQ for USB
This item lets you set an IRQ for USB.
Used MEM Base Addr
This item, in conjunction with the "Used MEM
Length", lets you set a memory space for non-PnP
compatible ISA card. This item specifies the memory
base (start address) of the reserved memory space.
The memory size is specified in the "Used MEM
.
Length"
Used MEM Length
If your ISA card is not PnP compatible and requires
special memory space to support its function, specify
the memory size in this parameter to inform the PnP
BIOS to reserve the specified memory space for
installed legacy ISA card.
AWARD BIOS
Location 3 Location 4
(pin A7) (pin B8)
INTC INTD
INTD INTA
INTA INTB
INTB INTC
INTB INTC
3-25