Suspend To Hard Drive - AOpen AX6BC User Manual

1.3

Suspend to Hard Drive

Suspend to Hard Drive saves your current work (system status, memory and
screen image) into hard disk, and then the system can be totally power off.
Next time, when power is on, you can resume your original work directly from
hard disk within few second without go through the Win95 booting process and
run your application again. If your memory is 16MB, normally, you need to
reserve at least 16MB HDD space to save your memory image. Note that you
have to use VESA compatible PCI VGA (AOpen PV70/PT70), Sound Blaster
compatible sound card and sound driver that supports APM (AOpen
AW32/AW35) for Suspend to Hard Drive to work properly. Of course, we
recommend to use AOpen products for best compatibility.
To use Suspend to Hard Drive:
1. Go into BIOS setup, Power Management
"Suspend to Disk".
2. Go into BIOS setup, PNP/PCI Configuration
"No". This can give BIOS the capability to allocate system resources for
Suspend to Hard Drive.
3. Boot up your system into DOS command prompt. If you are Win'95 user,
Please restart your Windows 95 under "Command Prompt" by pressing "F8"
while system shows "Windows 95 Starting ...". Choose "Safe Mode
Command Prompt Only" from selection so that system will start in DOS
command prompt.
4. Copy AOZVHDD.EXE to the root directory of your C: drive.
5. Option 1: Use /file switch (applied to FAT16 file system):
Please use following command to create a hidden file in the root directory of
your hard disk for Suspend to Hard Drive to save the system status and
memory image.
C:>AOZVHDD /c /file
Please make sure that you have enough continuous HDD space for
creating this hidden file. For example, if you have 32MB of system memory
and 4MB of VGA memory, you need at least 36MB (32MB + 4MB) of
continuous HDD space. If AOZVHDD failed to allocate the HDD space, you
may run "DEFRAG" Utility or "Disk Defragmenter" which come with MS-
DOS or Win'95 to free HDD space.
Overview
Suspend Mode Option, select
PnP OS Installed, select
1-9