AOpen AX6BC User Manual page 69

PNP/PCI Configuration
Resources Controlled
by
Auto
Manual
PNP/PCI Configuration
Reset Configuration
Data
Enabled
Disabled
PNP/PCI Configuration
PNP/PCI Configuration
PNP/PCI Configuration
PNP/PCI Configuration
PNP/PCI Configuration
PNP/PCI Configuration
PNP/PCI Configuration
PNP/PCI Configuration
PNP/PCI Configuration
PNP/PCI Configuration
IRQ 3
Legacy ISA
PCI/ISA PnP
Resources Controlled By
Setting this option to Manual allows you to individually
assign the IRQs and DMAs to the ISA and PCI
devices. Set this to Auto to enable the auto-
configuration function.
Reset Configuration Data
In case conflict occurs after you assign the IRQs or
after you configure your system, you can enable this
function, allow your system to automatically reset your
configuration and reassign the IRQs, DMAs, and I/O
address.
IRQ3 (COM2)
IRQ4 (COM1)
IRQ5 (Network/Sound or Others)
IRQ7 (Printer or Others)
IRQ9 (Video or Others)
IRQ10 (SCSI or Others)
IRQ11 (SCSI or Others)
IRQ12 (PS/2 Mouse)
IRQ14 (IDE1)
IRQ15 (IDE2)
If your ISA card is not PnP compatible and requires a
special IRQ to support its function, set the selected
IRQ to Legacy ISA. This setting informs the PnP
BIOS to reserve the selected IRQ for the installed
legacy ISA card. The default is PCI/ISA PnP. Take
note that PCI cards are always PnP compatible
(except old PCI IDE card).
AWARD BIOS
3-23