Telstra Big Pond; Dns - AOpen AOR-411 User Manual

2.2.6 Telstra Big Pond

Select Telstra Big Pond if your ISP requires the Telstra Big Pond protocol to connect you to the
Internet. Your ISP should provide all the information required in this section. Telstra Big Pond
protocol is used by the ISP in Australia.
Parameter
User Name
Password
User decide login server
manually
Login Server
Click <OK> when you finish the configuration above. Congratulations! You have completed the
configuration for the Telstra Big Pond connection. You can start using the router now, if you wish
to use some of the advanced features supported by this router see chapter 2, 3, 4.

2.2.7 DNS

A Domain Name System (DNS) server is like an index of IP addresses and Web addresses. If
you type a Web address into your browser, such as www.router.com, a DNS server will find that
name in its index and the matching IP address. Most ISPs provide a DNS server for speed and
convenience. If your Service Provider connects you to the Internet with dynamic IP settings, it is
likely that the DNS server IP address is provided automatically. However, if there is a DNS server
that you would rather use, you need to specify the IP address of that DNS server here.
Description
Enter the User Name provided by your ISP for the Telstra Big
Pond connection.
Enter the Password provided by your ISP for the Telstra Big
Pond connection.
Select if you want to assign the IP of Telstra Big Pond's login
server manually.
The IP of the Login Server.
29