Table of Contents
Advertisement
Idle Time Out
Click <OK> when you have finished the configuration above. Congratulations! You have
completed the configuration for the L2TP connection. You can start using the router now, if you
wish to use some of the advanced features supported by this router, see chapter 2, 3, 4.
1.6 Telstra Big Pond
Select Telstra Big Pond if your ISP requires the Telstra Big Pond protocol to connect you to the
Internet. Your ISP should provide all the information required in this section. Telstra Big Pond
protocol is used by the ISP in Australia.
again, the router will not auto-connect to the ISP.
The WAN "idle timeout" auto-disconnect function may not
work due to abnormal activities of some network application
software, computer virus or hacker attacks from the Internet.
For example, some software sends network packets to the
Internet in the background, even when you are not using the
Internet. This function also may not work with some ISP. So
please make sure this function can work properly when you
use this function in the first time, especially your ISP charge
you by time used. Due to the many uncontrollable issues, we
do not guarantee the WAN "idle timeout" auto-disconnect
function will always work. In order to prevent from extra fee
charged by ISP, please TURN OFF THE ROUTER WHEN
YOU FINISHED USING THE INTERNET.
Advertisement
Table of Contents
