Signal Stand by HD Digital Satellite Receiver HD Digital Receiver User Manual MODEL NUMBER HDR-6110USB Please read this Manual thoroughly before using your Receiver and then retain for future reference.
Contents 1. Important Safety Instructions Safety Information General Information 2. In the Box 3. Controls and Functions Front Panel Rear Panel Remote Control Remote Control Functions 4. Installation Satellite Dish Installation (REFER TO SEPARATE INSTRUCTIONS) Receiver Installation 4.2.1 Connecting your Receiver 4.2.2 Preparing your Remote Control 4.2.3...
DO NOT operate this unit in damp conditions or allow water or other fl uids to enter the enclosure. If this happens, switch off IMMEDIATELY and refer the device to the Ross Helpline. DO NOT touch the mains plug or power cord with wet hands. Electric shock Hazard.
1.2 General Information • Thank you for choosing a Ross Digital Satellite TV Receiver. Treated with care and used in accordance with the contents of this manual it will provide many years of reliable service. This symbol indicates that, at the end of its useful life, this product must •...
3.0 Controls & Functions: 3.1 Front Panel Signal Stand by HD Digital Satellite Receiver - Standby Button - Channel Down Button - Channel Up Button 3.2 Rear Panel - LNB IN: To connect the input cable from the satellite dish. - LNB OUT: To connect to another satellite receiver if required.
3.3 Remote Control TIMER MUTE POWER AUDIO TIMER SUBTL RECALL FAVOURITE NUMERIC BUTTONS TIMESHIFT PAGE UP/DOWN 16:9 V-FORMAT LANG CH+/- VOL+/- EXIT MENU INFO TV/RADIO ZOOM PAUSE BACKWARD STOP PLAY/PAUSE FORWARD RECORD PREVIOUS SLOW NEXT MEDIA GAME...
3.4 Remote Control Functions Button Function POWER: Turns on the power or switches the unit to standby mode TIMER: To select upto 8 timer sequences of your choice. EPI: Shows Now and Next EPG for the programme being viewed. NUMERIC BUTTONS: Enter a number to select a channel directly or to select the menu options.
Page 8
Button Function SUBTL: Sets broadcast dependant subtitles for the current TV programme. RECALL: Press to switch to previously watched channel. FAV: Select favourite channel list or current channel list in the view mode. TIMESHIFT: (NOT AVAILABLE ON THIS MODEL). PAGE UP/DOWN: Press to jump one page up or down. V-FORMAT: Press to select the video output mode between;...
4.0 Installation: Introduction This manual will help you learn the basic use of your receiver such as installation, selecting channels and many other functions of the set top box. 4.1 Satellite Dish Installation Please refer to the separate documentation “Satellite Dish Installation Guide” to install your dish.
4.2.4 Check Satellite Signal Reception • Press the Menu Button on the Remote Control. • The Installation Menu will be displayed. • Using the CH- Button select Antenna Setting and then press OK. • Please note that ASTRA 2A/B/D and Eurobird 1 satellite is labelled 4.ASTRA/EURO1. Your Receiver has a large number of the available Satellites already programmed in to •...
5.0 Menu System: 5.1 Installation Menu In this part of the manual only the basic installation is covered. If you wish to set up your receiver to work with a motorised dish then please refer to SECTION 6, “Advanced Instal- lation”.
5.2.1 TV Channel Edit Using the “VOL-” and “VOL+” buttons you can select from the options of; LOCK, DE- LETE, MOVE, RENAME, EDIT and SELECT functions to edit your TV programmes. You can press the “CH-” or “CH+” buttons to select the channel, and press “VOL-” or “VOL+” button to choose the functions which are displayed towards the bottom of the OSD.
5.2.2 Radio Channel Edit Using the “VOL-” and “VOL+” buttons you can select from the options of; LOCK, DELETE, MOVE, RENAME, EDIT and SELECT functions to edit your Radio programmes. You can press the “CH-” or “CH+” buttons to select the channel, and press “VOL-” or “VOL+”...
5.3.1 System Setting Adjust the SYSTEM SETTINGS to match your TV and other equipment. When fi nished confi guring the settings, press “OK” to save and exit. You will be prompted to confi rm your new settings prior to exiting. TV type: Set your desired Resolution selecting •...
5.3.3 Timer Press TIMER button to enter directly from the remote control. • The TIMER Menu provides access to 8 Timers for you to programme enabling you to switch to your desired programme at a specifi c time to avoid missing something you want to watch.
5.4 User Settings This section allows the setting of PARENTAL CONTROL preferences, OSD settings, details of any connected USB device and fi nally FACTORY DEFAULT (resets the whole receiver back to how it left the factory). Press MENU and then VOL+ to enter the USER SETTINGS Menu, then use the CH-, CH+ keys to select the item you wish to adjust and the VOL-, VOL+ to select the new setting.
5.4.2 OSD Control In this Menu you can Select the preferred MENU LANGUAGE, STANDBY DISPLAY, INFORMATION BAR TIMEOUT and REMOVE TIMESHIFT FILE. Menu Language: To select the preferred OSD • language. “English” is set as the default language. • Standby Display: Turns the Time Display ON or OFF when in Standby Mode.
NOTE: Further information on this Procedure is available in SECTION 7. This function MUST be used with EXTREME CAUTION. ONLY Software provided by your Service Centre can be used. Use of other Software may damage your device and invalidate your warranty. During the UPDATE process DO NOT press any buttons or switch the unit off.
6.0 Advanced Installation: This section is aimed at the more experienced Satellite Receiver (Set Top Box) user. Specifi cally, it describes how to set up your unit to work with a Motorised Dish and how to add additional Satellites that are not present in the Factory pre-loaded list. Press MENU to enter the INSTALLATION Menu, then use the CH-, CH+ keys to select the item you wish to adjust and the VOL-, VOL+ to select the new setting.
Page 20
[1] SCAN Press the RED button “SAT”, to search for channels from the current satellite. [2] ADD SATELLITE Press the GREEN button “ZOOM”, to add a new satellite, confi gure the settings such as; satellite name, east/west and longitude then press “OK” to save and exit.
[3] TP EDIT Press the YELLOW button “PAUSE” to edit the current TP. Choose the current TP number by “VOL-” or “VOL+” buttons, then input the frequency value and symbol rate value by numeric key, choose the correct Polarization, Horizontal or Vertical then save and exit. [4] DELETE TP Press the BLUE button “TV/RADIO”, to delete the current selected TP.
• User Longitude: Enter your Longitude using the numerical keys East / West: Select EAST / WEST depending on the Satellite locations • USALS: Set to ON as required. • Enter the required information as above and then press OK to SAVE and EXIT back to the INSTALLATION MENU.
TV program. Tips: If you refer to this troubleshooting guide, but fi nd no solution for the problem you encountered. Please contact the Ross Helpline. DO NOT OPEN THE SET TOP BOX. WARNING: Problems can be caused by the use of unoffi cial software. The use of software versions other than dealers or distributors offi...
C - 65 UK Offi ce: Staff ord Park 1, Telford, Shropshire, England, TF3 3BD Tel: +44 (0) 1952 238 100 • Fax: +44 (0) 1952 238 180 Helpline: 0845 194 7584 (UK) For further product information please go to: www.ross-style.com...
Need help?
Do you have a question about the HDR-6110USB and is the answer not in the manual?
Questions and answers