Before You Get Started; Shipment; Initial Operation; Online Registration - Behringer U-CONTROL UCA222 User Manual

U-CONTROL UCA222 User Manual

Before You Get Started

Shipment

Your UCA222 was carefully packed at the assembly plant to
assure secure transport. Should the condition of the cardboard
box suggest that damage may have taken place, please inspect
the unit immediately and look for physical indications of
damage.
Damaged equipment should NEVER be sent directly to us.
◊
Please inform the dealer from whom you acquired the unit
immediately as well as the transportation company from
which you took delivery. Otherwise, all claims for replace-
ment/repair may be rendered invalid.
Please always use the original packaging to avoid damage
◊
due to storage or shipping.
Never let unsupervised children play with the equipment
◊
or with its packaging.
Please dispose of all packaging materials in an environmen-
◊
tally friendly fashion.

Initial operation

Please make sure the unit is provided with sufficient ventila-
tion, and never place the UCA222 on top of an amplifier or in the
vicinity of a heater to avoid the risk of overheating.
The current supply is made via the USB connecting cable, so
that there is no external power supply unit required. Please
adhere to all required safety precautions.

Online registration

Please do remember to register your new BEHRINGER equip-
ment right after your purchase by visiting www.behringer.com
(alternatively www.behringer.de) and kindly read the terms and
conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to
have it repaired as quickly as possible. To arrange for warranty
service, please contact the retailer from whom the equip-
ment was purchased. Should your BEHRINGER dealer not
be located in your vicinity, you may directly contact one of our
subsidiaries. Corresponding contact information is included
in the original equipment packaging (Global Contact Informa-
tion/European Contact Information). Should your country not
be listed, please contact the distributor nearest you. A list of
distributors can be found in the support area of our website
(www.behringer.com/support).
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
Thank you for your cooperation!

System Requirements

The UCA222 is PC and Mac-compatible. Therefore, no
◊
installation procedure or drivers are required for the
correct functioning of the UCA222.
To work with the UCA222, your computer must fulfill the
following minimum requirements:
PC
Intel or AMD CPU, 400 MHz or higher
Minimum 128 MB RAM
USB 1.1 interface
Windows XP, 2000

Hardware connection

Use the USB connecting cable to connect the unit to your
computer. The USB connection also supplies the UCA222 with
current. You can connect a variety of devices and equipment to
the inputs and outputs.

Controls and Connectors

Indicates the status of the USB
POWER LED –
[ 1 ]
power supply.
The Toslink jack carries an S/PDIF
OPTICAL OUTPUT –
[ 2 ]
signal which can be connected via a fiber optic cable.
Connect a standard pair of headphones
PHONES –
[ 3 ]
equipped with a ⅛" mini plug.
Adjusts the volume level of the headphones
VOLUME –
[ 4 ]
output. Turn the control fully to the left before you connect
the headphones to avoid hearing damage caused by high
volume settings. Turn the control to the right to increase
the volume.
Connect to a speaker system using stereo RCA
OUTPUT –
[ 5 ]
cables to monitor the audio output from the computer.
MAC
G3, 300 MHz or higher
Minimum 128 MB RAM
USB 1.1 interface
Mac OS 9.0.4 or higher, 10.X or higher
3