Before You Get Started; Shipment; Initial Operation; Online Registration - Behringer U-PHONO UFO202 User Manual

U-PHONO UFO202 User Manual

Before You Get Started

Shipment

Your UFO202 was carefully packed at the assembly plant to
assure secure transport. Should the condition of the cardboard
box suggest that damage may have taken place, please inspect
the unit immediately and look for physical indications of
damage.
Damaged equipment should NEVER be sent directly to us.
◊
Please inform the dealer from whom you acquired the unit
immediately as well as the transportation company from
which you took delivery. Otherwise, all claims for replace-
ment/repair may be rendered invalid.
Please always use the original packaging to avoid damage
◊
due to storage or shipping.
Never let unsupervised children play with the equipment
◊
or with its packaging.
Please dispose of all packaging materials in an environmen-
◊
tally friendly fashion.

Initial operation

Please make sure the unit is provided with sufficient ventila-
tion, and never place the UFO202 on top of an amplifier or in the
vicinity of a heater to avoid the risk of overheating.
The current supply is made via the USB connecting cable, so
that there is no external power supply unit required. Please
adhere to all required safety precautions.

Online registration

Please do remember to register your new BEHRINGER equip-
ment right after your purchase by visiting www.behringer.com
(alternatively www.behringer.de) and kindly read the terms and
conditions of our warranty carefully.
Should your BEHRINGER product malfunction, our goal is to
have it repaired as quickly as possible. To arrange for warranty
service, please contact the retailer from whom the equipment
was purchased. Should your BEHRINGER dealer not be located
in your vicinity, you may directly contact one of our subsidiaries.
Corresponding contact information is included in the original
equipment packaging (Global Contact Information/European
Contact Information). Should your country not be listed, please
contact the distributor nearest you. A list of distributors can be
found in the support area of our website (www.behringer.com/
support).
Registering your purchase and equipment with us helps us
process your repair claims quicker and more efficiently.
Thank you for your cooperation!

System Requirements

The UFO202 is PC and Mac-compatible. Therefore, no
◊
installation procedure or drivers are required for the
correct functioning of the UFO202.
To work with the UFO202, your computer must fulfill the
following minimum requirements:
PC
Intel or AMD CPU, 400 MHz or higher
Minimum 128 MB RAM
USB 1.1 interface
Windows XP, 2000

Hardware connection

Use the USB connecting cable supplied with the UFO202 to
connect the unit to your computer. The USB connection also
supplies the UFO202 with current. You can connect a variety of
devices and equipment to the inputs and outputs.
Operating Elements and
Connections
4 3
7 8
– Connect an external monitoring
L and R RCA outputs
[ 1 ]
device, such as a pair of monitor speakers, to the left and
right RCA outputs. (this step is optional)
– Connect the audio source (record
L and R RCA inputs
[ 2 ]
player, tape player, etc.) to the left and right RCA inputs.
– Some record players have a
Ground connection
[ 3 ]
separate ground cable. If so, attach the cable to the ground
terminal to avoid excessive noise and hum.
– Move the switch on the top left to
Line/Phono switch
[ 4 ]
PHONO if transferring from a record player. For all other
sources, select LINE.
MAC
G3, 300 MHz or higher
Minimum 128 MB RAM
USB 1.1 interface
Mac OS 9.0.4 or higher, 10.X or higher
2 1
5 6
3