Table of Contents
Advertisement
Anti-theft device
Entering the code number
Anti-theft device
If the Rear Seat Entertainment System is
disconnected from the electrical supply
source, the anti-theft device prevents it
from being reconnected. After switching
on at the
button on the remote
control, the following prompt
displayed.
The four-digit code must be entered
using the arrow buttons on the remote
control. The unit automatically enters
the serial number.
Example:
Code number 1372 (the code number
can be found on the enclosed CODE
CARD).
44
X
Enter the individual digits using arrow
buttons
and
control.
Press the
X
remote control to confirm the digit
entered.
When all the digits have been entered
is
correctly,
the
unit
automatically.
Note
It is important to store the CODE
CARD in a safe place outside the
vehicle to prevent unauthorised use.
The window stickers provided should
be attached to the windscreen/windows
inside your vehicle.
If an incorrect code number is entered,
on the remote
the prompt
button on the
switches
on
If an incorrect code number is entered
three times in a row, the unit will display
„
blocked for approximately 60 minutes.
A further incorrect entry blocks the unit
for another 60 minutes.
Attention:
The unit and the vehicle ignition must
remain
60-minute waiting period. If the
ignition does not remain switched on,
the waiting period will begin again.
will be displayed.
", and the unit will be
switched
on
during
the
Advertisement
Table of Contents
