Using Beo6 - Bang & Olufsen BEO6 Manual

Before you start using your remote
control for the very first time, it
must be charged. Refer to page 7
for information about how to
charge your remote control.
When fully charged, your remote
control is ready for use.
To activate the Beo6 display, just
pick up your remote control or
touch the screen lightly, and the
display lights up. Then select a
button by a press on the screen.

Using Beo6

Once a source is selected, operation is
carried out by pressing buttons on the
screen or via the Beo6 ball – for example
to adjust volume, step through tracks or
channels and pause playback.
5
When you pick up the remote control or
touch the screen, the display lights up.
Once the display is active, the buttons
appear on the screen. Press a button to
activate a source or function.