Fisher-Price Pixter Multi-Media H4651 Owner's Manual page 23

Calibrating the Stylus
Mark on Screen
Tip of Stylus
Calibration Hole
• Turn Pixter® over and locate the calibration hole.
• Insert, push and hold the stylus in the calibration hole. Turn Pixter over
so that you can see the screen. When you see two
the stylus from the calibration hole.
• First touch the upper left corner
• Then, touch the lower right corner
IMPORTANT!
From time to time, the mark made
on your screen from the stylus and
the location of the tip of the stylus
may not align. When this happens,
you must calibrate the stylus.
with the tip of the stylus.
with the tip of the stylus.
23
, you can remove