Load Song - Suzuki HP-275e Owner's Manual

DISK (HP-275e Only)
72
PDF 文件使用 "pdfFactory Pro" 试用版本创建
Load Song - Load Song retrieves a previously stored MIDI song
from the floppy disk drive. If you want to permanently edit a
song you must load the file into the music recorder
(sequencer). Since the Standard MIDI file that you have on
disk and your muscial performance in the recorder
(sequencer) share the same memory, selecting a song file
may bring up a confirmation pop up screen, saying it will
overwrite the song that is currently in the sequencer.

Load Song

Save Song
1. Make sure the disk you have selected has song data files on it.
Any standard MIDI file formatted song will be recognized by
the piano' s recorder (sequencer).
2. Select the Load Song menu, and the list of song files con-
tained on the disk will be displayed on the screen. If there
are more than 4 songs on the disk, the SCREEN RIGHT/
LEFT indicators will be lit. Press them to access the addi-
tional song files on the disk.
3. Highlight the song file you would like to load and press the
ENTER button. A caution screen will appear asking if you
are sure you want to load the song file sequence.
4. "OK" the command. A progress bar will be displayed showing
the status of the load. The main disk menu screen will be
displayed after your selected song file has been loaded.
5. Press the PLAY/PAUSE button, the song you have just loaded
into the sequencer will begin to play.
www.fineprint.com.cn
DISK MENU
Utility
Play Disk