AEG LAVAMAT W 1450 ELECTRONIC User Information page 31

Aeg washing machine lavamat electronic
Hide thumbs Also See for LAVAMAT W 1450 ELECTRONIC:
Table of Contents

Advertisement

Problem
The END (FIN/EINDE)
light flashes once and
at the same time an
acoustic signal sounds
once.
The END (FIN/EINDE)
light flashes 8 times
and at the same time
an acoustic signal
sounds 8 times.
The washing machine
vibrates when operat-
ing or is noisy.
The main wash deter-
gent solution produces
too many suds.
Possible Cause
The water tap is closed.
The filter in the threaded in-
let hose fitting is blocked.
Water tap is furred with
limescale or faulty.
The programme selector has
not clicked into place cor-
rectly.
The transit bolt/bars were
not removed.
The height-adjustable screw
feet have not been set
correctly.
There is very little washing in
the drum (for example, only
one bathrobe).
Water could not be drained
completely before spinning,
because the outlet hose has
got a kink in it or the drain
pump is blocked.
Probably too much detergent
was used.
Instructions for use
Remedy
Open the water tap. Re-start
the programme.
Switch off the washing ma-
chine:
Close the water tap. Remove
the plug from the mains, un-
screw the hose from the wa-
ter tap, take out the filter
and wash it in running water.
Check the water tap and
have it repaired, if necessary.
First turn the programme se-
lector to OFF (ARRET/UIT),
then set the desired pro-
gramme to the exact posi-
tion.
Remove the transit bolts/bars
as described in the
Installation and Connection
instructions.
Adjust the screw feet as de-
scribed in the Installation
and Connection instructions.
Operation is not affected by
this.
Check the positioning of the
outlet hose and even out any
kinks if necessary or clean
the drain pump and remove
any foreign matter that
might be in the pump hous-
ing.
Follow the manufacturer's
instructions exactly, when
measuring out detergent.
31

Hide quick links:

Advertisement

Table of Contents
loading

Table of Contents