Table of Contents
Advertisement
12
Care and cleaning
CARE AND CLEANING
Clean the appliance after each use.
Always use cookware with clean bottom.
WARNING!
Sharp objects and abrasive cleaning agents will damage the appliance.
For your safety, do not clean the appliance with steam blasters or high-pressure cleaners.
Scratches or dark stains on the glass ceramic have no effect on how the appliance operates.
Removing the dirt:
1. – Remove immediately: melting plastic, plastic foil, and food containing sugar. Use
a special glass ceramic scraper. Put the scraper on the glass ceramic surface at an
acute angle and slide the blade on the surface.
– Stop the appliance and let it cool down before you clean: limescale rings, water
rings, fat stains, shiny metallic discolorations. Use a special cleaner for glass ceramic
or stainless steel.
2. Clean the appliance with a damp cloth and some detergent.
3. At the end rub the appliance dry with a clean cloth.
WHAT TO DO IF...
Problem
You cannot start the appliance
or operate it.
A sound operates when the ap-
pliance is off.
The residual heat indicator does
not come on.
You cannot switch on the outer
ring.
A sound operates and appliance
starts and stops again. After 5
seconds one more sound oper-
ates.
Possible cause and remedy
• Start the appliance again and set the heat setting in 10 sec-
onds.
• The child safety device or
vice or
. See the section "Child safety device" or "Stop and
go".
• You touched 2 or more sensor fields at the same time. Only
touch one sensor field.
• There is water or fat stains on the control panel. Clean the
control panel
You covered one or more sensor fields. Uncover the sensor fields.
Clean the control panel.
The cooking zone is not hot because it operated only for a short
time. If the cooking zone must be hot, speak to the after sales
service.
Switch on the inner ring first.
You covered
. Uncover the sensor field.
operates . Stop child safety de-
Advertisement
Table of Contents
