Water Protection System; Electrical Connection - AEG ÖKO FAVORIT 5470 Operating Instructions Manual

Water protection system

To protect your dishwasher from water damage, it is equipped with a water
protection system.
Apart from an overflow protection, which prevents uncontrolled rising of
water in the appliance, it also features an outlet protection (float switch in
the floor tray). This responds in the event of any untightness in the machine.
In all cases of malfunction, the water supply is immediately interrupted and
the drain pump switched on. This prevents water from either flowing out or
overflowing. Any residual water in the appliance is automatically pumped
away. The pump also operates even if the machine is switched off and should
not be disconnected from the electricity supply.
A fault is recognised by the fact that a pump noise can be heard - even when
the machine is switched off.
If a fault occurs, first turn off the water tap. Then pull the plug out of the
plug socket. If there is a fixed connection, switch off or unscrew the fuse(s).

Electrical connection

Before plugging the appliance into the wall socket, make sure that:
1. The mains voltage corresponds to the voltage given in the technical
specifications.
2. The meter, fuses, mains power supply and wall socket can all take the
maximum load required.
Make sure that the socket and plug are compatible without having to use
any type of adaptor. If necessary, have the domestic wiring system socket
replaced.
Safety standards require the appliance to be earthed.
The Manufacturer accepts no liability for failure to observe the above safety
precautions.
40