AEG ÖKO FAVORIT 5470 Operating Instructions Manual page 37

To fit the panel
Take the door frame off after removing the retaining screws around the
edge.
Position the panel, refit the frame and tighten the retaining screws around
the edge.
Note:
The panel should be fitted before positioning the machine.
For built-in appliances only
Please consult the enclosed template with the installation instructions.
Please note the following before installing:
When the door is opened after the programme has ended, steam escapes
from the machine as a normal operation feature and may cause non-
watertight bonded worktops to swell and warp.
The pack provided therefore includes a metal protection. In all cases, this
must be properly arranged to prevent subsequent damage to the worktop.
the protection should be arranged according to the instructions given on the
template.
The automatic dishwasher is then installed in the furniture recess.
When installing the dishwasher in the recess, please make sure that the
drain hose, supply hose and electrical supply lead are arranged so they
can move freely in the rear plinth area and so that any kinking or
squashing of these connections leads is prevented.
37