PERIODIC MAINTENANCE AND MINOR REPAIR
7. Push down hard on the handlebar
several times to check for proper
fork operation.
6
Rear wheel
To remove the rear wheel
WARNING
G
It is advisable to have a Yamaha
dealer service the wheel.
G
Securely support the motor-
cycle so that there is no danger
of it falling over.
1. Loosen the axle nut.
2. Lift the rear wheel off the ground
according to the procedure on
page 6-34.
3. Remove the axle nut.
4. Loosen the locknut and drive chain
adjusting nut on each side of the
swingarm.
6-36
EAU25080
EAU34411
EWA10820
1. Axle nut
2. Drive chain slack adjusting nut
3. Locknut
5. Push the wheel forward, and then
remove the drive chain from the
rear sprocket.