Handlebar Switches - Yamaha FZ6-N Owner's Manual

INSTRUMENT AND CONTROL FUNCTIONS

Handlebar switches

Left
3
1. Pass switch " "
2. Dimmer switch " /
3. Turn signal switch " /
4. Horn switch " "
5. Hazard switch " "
EAU12347 Right
1. Engine stop switch "
2. Start switch "
"
Pass switch "
"
Press this switch to flash the headlight.
Dimmer switch "
Set this switch to "
beam and to "
Turn signal switch "
To signal a right-hand turn, push this
switch to "
turn, push this switch to "
leased, the switch returns to the center
/ "
"
EAU12350
"
EAU12400
/ "
" for the high
" for the low beam.
EAU12460
/ "
". To signal a left-hand
". When re-
3-10
position. To cancel the turn signal
lights, push the switch in after it has re-
turned to the center position.
Horn switch " "
Press this switch to sound the horn.
Engine stop switch " /
Set this switch to " " before starting
the engine. Set this switch to "
stop the engine in case of an emergen-
cy, such as when the vehicle overturns
or when the throttle cable is stuck.
Start switch " "
Push this switch to crank the engine
with the starter.
CAUTION:
See page 5-1 for starting instruc-
tions prior to starting the engine.
The engine trouble warning light will
come on when the key is turned to "ON"
and the start switch is pushed, but this
does not indicate a malfunction.
EAU12500
EAU12660
"
" to
EAU12710
ECA10050
EAU41700