Introduction; Overview - AOpen CRW5232 User Manual

Introduction

2.
Introduction
2.1.

Overview

Thank you for purchasing AOpen CD-R/RW drive. In this manual, we will explain how to
install your CD-R/RW drive correctly. Please read this manual carefully before using the
drive.
Just Link
Just Link is a new technology developed independently by Ricoh that automatically
prevents buffer under-run errors by predicting them before they happen. AOpen
CD-R/RW drive features Just Link technology to enable stable writing in the following
situations where buffer under-run errors may otherwise occur in a conventional drive.
With high-speed writing,
When some other operation is being performed on the computer during writing,
When writing CD-R/CD-RW drive from a CD-ROM drive,
When writing directly via network.
Just Speed
Just Speed is a new technology developed independently by Ricoh. AOpen CD-R/RW
features Just Speed technology to reduces disc errors such as insufficient power in
drive
writing and servo follow error. The mechanism controls the maximum writing speed by
(1) using the ATIP information (maker name, model number, etc. pre-recorded on disc),
(2) performing test writing to the OPC area at the inner circumference of the disc
(3) getting the status of the servo follow check of the outer circumference of the disc
(checking of track shift due to lack of precision in cutting of the disc itself).
A combination of the above (1), (2), and (3) enables better certainty in high-speed writing,
while offering support to discs where maximum writing speed cannot be obtained from
the ATIP information
High Versatility
The AOpen CD-R/RW drive is an ideal all-in-one solution for reading CD's, copying
audio/software CD's, creating photo/audio/video CD's, or acting as a storage drive for
archiving or backup. The drive (retail pack only) comes complete with everything you
need to make CD's right away, including bundled software and blank CDs. With this
software, you can create your own CDs.
High Reliability
An improved anti-heat design and the OPC design boost recording reliability. Optimum
Power Control continually monitors signal levels during recording and adjusts laser
power to compensate for a dirty disc. This feature ensures a flat signal, significantly
-- E-2 --