Using Your Removable Handheld Steamer With Direct Steam Nozzle - Shark LIFT-AWAY PRO STEAM POCKET S3901SL Owner's Manual

Using Your Removable Handheld Steamer
with Direct Steam Nozzle
Cleaning Tip: The Direct Steam Nozzle creates direct steam spray to clean and
sanitise hard to reach nooks & crannies and other places where germs may build
up. Use the Direct Steam Nozzle to loosen and dislodge compact dirt often
found in corner and tight places where traditional methods and cleaning tools
tend to push dirt into, making it tough to reach and clean. Spray direct steam
and wipe clean with a wet cloth or paper towel.
fig. 16
FOR SPOT CLEANING AND STEAMING
2 First attach the Direct Steam Nozzle by pressing
the nozzle onto the Handheld Steamer until it
clicks into place. (fig. 16)
3 The Handheld Steamer is automatically set to
SCRUB mode. Squeeze the steam trigger to
activate steam. To change modes press the ON/
STEAM SETTING button to select either DUST,
MOP or SCRUB mode. You can change the steam
mode while the Handheld Steamer is in standby
or in use. Once the selected setting indicator
light has turned blue, hold down the steam
trigger to start steaming. (fig. 17)
For effective cleaning, hold the steam output
nozzle 1-2 inches away from the surface you're
cleaning.
10
S3901SL_11_IB_E_120619_1.indd 10
fig. 17
CAUTION: Do not press the steam trigger until
the Direct Steam Nozzle is snapped into the main
nozzle of your Handheld Steamer.
4 To remove the Direct Steam Nozzle, press and
hold down the Handheld Release Buttons. Then
slide out the Direct Steam Nozzle using the grip.
CAUTION: Do not press the steam trigger
while removing the Direct Steam Nozzle. Avoid
touching the tip of the Direct Steam Nozzle, as
this will be very hot after steaming.
NOTE: The Handheld Steamer may continue to
emit steam for a few seconds after the trigger
is released This is normal, and the steaming will
eventually come to a stop.
12-06-26 9:59 AM