Page 2
Please spend a few minutes reading to get the very best from it. ACCESSORIES AND CONSUMABLES In the AEG webshop, you’ll find everything you need to keep all your AEG appliances looking spotless and working perfectly. Along with a wide range of...
Contents CONTENTS 4 Safety information 7 Product description 8 Control panel 10 Use of the appliance 11 Setting the water softener 12 Use of dishwasher salt 13 Use of detergent and rinse aid 14 Multitab function 14 Loading cutlery and dishes 15 Washing programmes 17 Select and start a washing programme...
Safety information SAFETY INFORMATION Before the installation and use, read this manual carefully: • For your safety and the safety of your property. • To help the environment. • For the correct operation of the appliance. Always keep these instructions with the appliance also if you move or give it to a differ- ent person.
Safety information • Do not fill the rinse aid dispenser with other products than the rinse aid, (dishwasher cleaning agent, liquid detergent). This can cause damage to the appliance. • Make sure that the spray arms can move freely before you start a washing programme. •...
Safety information – If the water inlet hose or the safety valve are damaged, immediately disconnect the mains plug from the mains socket. – Contact the service centre to replace the water inlet hose with safety valve. WARNING! Dangerous voltage. Electrical connection •...
Product description WARNING! The dishwasher detergents are dangerous and can cause corrosion ! • If an accident occurs with these detergents, contact immediately a physician. • If the detergent gets into the mouth, contact immediately a physician. • If the detergent gets into the eyes, contact immediately a physician and clean the eyes with water.
Control panel CONTROL PANEL On/off button Programme guide Program touchpad Programme indicators Display Delay touchpad Start touchpad Indicators Option touchpad Indicators Multitab indicator. It comes on when you activate the function. ÖKO PLUS indicator. It comes on when you activate the function. Extra-Hygiene indicator.
Control panel Indicators Door indicator. It comes on when the door is open or not closed correctly. 1) When the salt container and/or the rinse aid dispenser are empty, the related indicators do not come on while a washing programme operates. On/off button Press this button to activate or deactivate the appliance.
Use of the appliance Option touchpad Multitab ÖKO PLUS Extra-Hygiene Press three times ACTIVATED ACTIVATED DEACTIVATED Press four times DEACTIVATED DEACTIVATED ACTIVATED Press five times ACTIVATED DEACTIVATED ACTIVATED Press six times DEACTIVATED DEACTIVATED DEACTIVATED It is not possible to activate the Extra-Hygiene function and the ÖKO PLUS function to- gether.
Setting the water softener 2. Fill the salt container with dishwasher salt. 3. Fill the rinse aid dispenser with rinse aid. 4. Load cutlery and dishes into the appliance. 5. Set the correct washing programme for the type of load and soil. 6.
Use of dishwasher salt Manual adjustment Turn the water hardness dial to the position 1 or 2 (refer to the table). Electronic adjustment 1. Activate the appliance. 2. Make sure that the appliance is in setting mode. 3. Press and hold the Delay touchpad and the Start touchpad at the same time until the programme indicators AUTO, PRO and SILENT flash.
Use of detergent and rinse aid USE OF DETERGENT AND RINSE AID Use of detergent To help the environment, do not use more than the correct quantity of detergent. Obey the instructions on the detergent packaging. How to fill the detergent dispenser: 1.
Multitab function You can set the rinse aid dosage between position 1 (lowest dosage) and position 4 (high- est dosage). Turn the rinse aid selector to increase or decrease the dosage. MULTITAB FUNCTION The multitab function is for combi detergent tablets. These tablets contain agents as detergent, rinse aid and dishwasher salt.
Washing programmes • Mix the spoons with other cutlery to prevent them to bond together. • When you put the items in the baskets, make sure that the water can touch all surfaces. • Put light items in the upper basket. Make sure that the items do not move. •...
Washing programmes Programme Type of soil Type of load Programme description Use this programme to quickly rinse the Rinse dishes. This prevents the remaining food to bond on the dishes and bad odours to come out from the appliance. Do not use detergent with this pro- gramme.
Select and start a washing programme Energy (kWh) Water (litre) Programme 1,3 - 1,5 14 - 15 0,8 - 0,9 11 - 12 1) The display shows the programme time. The water pressure and temperature, the variations of the mains supply and the quantity of dishes can change the consumption values.
Select and start a washing programme – The indicator of the phase in operation is on. The opening of the appliance door stops the countdown. When you close the door, the countdown continues from the point of interruption. Cancelling the delay start The countdown is not operating 1.
Care and cleaning • First remove the items from the lower basket, then from the upper basket. • There can be water on the sides and on the door of the appliance. Stainless steel be- comes cool more quickly than the dishes. CARE AND CLEANING To remove and clean the filters Dirty filters decrease the washing results.
What to do if… To clean the spray arms Do not remove the spray arms. If the holes in the spray arms become clogged, remove remaining parts of soil with a thin pointed object. To clean the external surfaces Clean the external surfaces of the appliance and control panel with a moist soft cloth. Only use neutral detergents.
What to do if… Malfunction Possible cause Possible solution The start of the washing pro- The appliance door is open. Close the appliance door. gramme does not occur. The door indicator is on. You did not press the Start Press the Start touchpad or touchpad or button.
Technical data Problem Possible cause Possible solution Incorrect level of the water Adjust the water softener with softener adjustment. the correct level. The salt container cap is not Make sure that the salt con- closed correctly. tainer cap is closed correctly. There are streaks, whitish The rinse aid quantity is too Decrease the rinse aid quantity.
Environment concerns Depth 625 mm Water supply pressure Minimum 0,5 bar (0,05 MPa) Maximum 8 bar (0,8 MPa) Cold water or hot water maximum 60 °C Water supply Capacity Place settings 1) Connect the water inlet hose to a water tap with a 3/4'' thread. The rating plate on the inner edge of the appliance door shows the electrical connection data.
Installation Make sure that the dimensions of the recess agree with the dimensions in the picture. How to remove the appliance worktop 1. Remove the rear screws (1). 2. Pull the worktop from the behind of the appliance (2). 3. Lift the worktop and move it from the front slots (3).
Page 25
• A stand pipe with vent-hole. The internal di- ameter must be minimum 4 cm. max 85 cm Remove the sink plug when the appliance drains the water to prevent that the water goes back into the appliance. min 40 cm The drain hose extension must not be longer than 2 m.