Radio Operations - Clarion ADB340MP Owner's Manual

Basic Operations
Setting EQ effects to ON/OFF
*
The factory default setting is
"ON".
1. Press and hold the [EQ] button for 1 second
or longer to turn off the EQ effect.
"~"
goes off in the display.
2. Press and hold the [EQ] button for 1 second
or longer to turn on the EO effect.
"~"
lights in the display.
Switching the spectrum analyzer
display patterns
You can select one out of 9 patterns or set it to
off.
*
The factory default setting is "SND BEAT".
1. Each time you press the [SPE/ANAj button,
the spectrum analyzer display pattern
changes in the following order:
SND BEAT ~ SND WAVE ~ SND RISE ~
SND SNOW
~
CROSS
~
EXPAND
~
HO-
RIZON ~ SHADOW ~ S/ASCAN ~ S/A OFF
~ SND BEAT. ..
Note:
The spectrum analyzer display is unavailable dur-
ing these operations below;
o
Seek tuning and auto store in radio mode.
• Pause.
• When "NO DISC", "NO CASS" or an error mes~
sage appears in the display
• When fast-forwarding, fast-back warding or paus-
ing the tape in tape mode.
10
ADB340MP/ADB341MP
Radio Operations
FM reception
For enhanced FM performance the
MRGI-TUNE® tuner includes signal actuated
stereo control and Multipath noise reduction cir-
cuits.
Listening to the radio
1. Press the [FNC] button and select the radio
mode.
2. Press the [BND] button and select the radio
band. Each time the button is pressed, the
radio reception band changes in the follow-
ing order:
FM1 ~ FM2 ~ FM3 ~AM ~ FM1 ...
3. Press the [.......... ] or [~] button to tune in the
desired station.
Tuning
There are 3 types of tuning mode available, seek
tuning, manual tuning and preset tuning.
Seek tuning
1. Press the [BND] button and select the desired
band (FM or AM).
*
If
"mYmJ"
is lit in the display, press and hold
the [BND] button for 1 second or longer.
"cmI!J"
in the display goes off and seek tuning is now
available.
2. Press the [.......... ]
or [.... ]
button to automati-
cally seek to the next station.
When the [.... ] button is pressed, the sta-
tion is sought in the direction of higher fre-
quencies; if the [.......... ] button is pressed, the
station is sought in the direction of lower fre-
quencies.
Manual tuning
There are 2 ways available: Quick tuning and step
tuning.
When you are in the step tuning mode, the fre-
quency changes one step at a time. In quick tun-
ing mode, you can quickly tune the desired fre-
quency.
1. Press the [BND] button and select the desired
band (FM or AM).
*
If
"mYmJ"
is not lit in the display, press and hold
the [BND] button for 1 second or longer.
"mmJ)"
lights in the display and manual tuning is now
available.
2. Tune into a station.