Inserting/Removing The Fat Filter; Meatprobe - AEG B8831-5 User Manual

Aeg built-in electric oven

Hide thumbs Also See for B8831-5:

Table of Contents

Inserting/Removing the Fat Filter

Only use the fat filter when roasting to pro-

tect the rear heating elements from fat splash-

es.

Inserting the fat filter

Hold the fat filter by the grip and insert

the two mounts downwards into the

opening on the rear wall of the oven

(fan opening).

Taking out the fat filter

Hold the fat filter by the grip and un-

hook it.

For switching off the oven when the temperature at the centre of a roast reaches a set

temperature.

There are two temperatures to consider:

– The oven temperature: see Roasting Table

– The core temperature: see Meatprobe Table

Important!: Only the meat probe supplied may be used. If replacing, please use only

genuine spare parts.

1. Switch on the appliance using the On/Off

2. Push the tip of the meat probe right into the

meat so that the tip is in the centre of the

meat.

3. Insert the meat probe plug into the socket on

the side wall of the oven as far as it will go.

4. Using the

temperature.

button set the desired core

Using the Oven

button.

Table of Contents