Table of Contents
Advertisement
Available languages
Available languages
28
Control panel
The indicator light comes on when the washing programme is completed.
The indicator light comes on when it is necessary to fill the salt container. Refer to the
chapter 'Use of dishwasher salt'.
1)
The salt indicator light can stay on for some hours, but it does not have an unwanted effect
on the operation of the appliance.
The indicator light comes on when it is necessary to fill the rinse aid. Refer to the chapter
'Use of rinse aid'.
1)
1) The indicator light is off when a washing programme operates.
Delay start button
Use the delay start button to delay the start of the washing programme with an interval
between 1 and 19 hours. Refer to the chapter 'Setting and starting a washing programme'.
Digital display
The display shows:
• Adjusted level of the water softener.
• Programme duration.
• Remaining time to the end of the programme.
• End of a washing programme.
• Number of hours in delay start.
• Fault codes.
SILENT button
Silent is a silent washing programme that will not disturb you. It can be set in times with a
more economical power rate.
During the Silent the pump runs at a very low speed to reach a noise level reduction of
25% compared to the declaration programme. As a consequence, it has a very long running
time.
Function buttons
Use the function buttons for these operations:
• To set the water softener. Refer to the chapter 'Setting the water softener'.
• To cancel the washing programme in progress or a delay start in progress. Refer to the
chapter 'Setting and starting a washing programme'.
Setting mode
The appliance is in setting mode when all programme indicator lights are on.
The appliance must be in setting mode for these operations:
– To set a washing programme.
– To set the water softener level.
If a programme indicator light is on, cancel the programme to go back to the setting mode.
Refer to the chapter "Setting and starting a washing programme".
Indicator lights
Advertisement
Table of Contents
