Using Vehicle Battery Power - Radio Shack HTX-10 Owner's Manual

To connect the external speaker to
the transceiver, insert the speaker's
plug into the
EXT
the transceiver
Note:
Connecting
speaker disconnects the transceiv-
er's internal speaker.

USING VEHICLE BATTERY POWER

Follow these steps to connect the
transceiver to your vehicle's bat-
tery power.
1. Connect the red wire (with in-
line fuse holder) from the
back of the transceiver to a
point in your vehicle's fuse
block that has power only
when the ignition is in the
ACC (accessory) or ON posi-
tion.
2. Connect the black wire to a
metal part of the vehicle's
frame (chassis ground).
jack on the back of
an external
Red wire to
positive (+) terminal
Black wire to
negative (-) terminal
13