Using Lcr (Last Channel Recall); Using M-Load; Using Nb (Noise Blanker) - Radio Shack HTX-10 Owner's Manual

Using LCR (Last Channel Recall)

Press to return to the last channel you selected.
LCR

Using M-LOAD

You can recall frequencies stored in memory Channels 1–5.
Note: See "Using M-SAVE (Memory Save)" on Page 25 for more
information about storing frequencies in memory channels.
To recall a memory channel, press so appears, then,
L
M-LOAD
press the desired memory channel number.

Using NB (Noise Blanker)

If the transceiver's reception is disturbed by interference from
electrical noise (such as ignition noise), you can reduce the noise
by using the transmitter's noise blanker feature. To turn on or off
the noise blanker, press then . NB appears while
PUSH FUNC NB
the noise blanker is on.
23