Table of Contents
Advertisement
21-1811.fm Page 7 Thursday, August 5, 1999 3:01 PM
Follow these steps to set a quiet
code.
1. Hold down
for 2 sec-
QUIET
onds until QUIET appears and
the quiet code flashes.
2. Repeatedly press (or hold
down)
CHANNEL
until you see the code number
you want to use.
3. Press
to store the code.
QUIET
To turn on the quiet feature, press
. QUIET appears. To turn off
QUIET
the feature, press
so QUIET
QUIET
disappears.
Note: For the most effective com-
munication, select a quiet code from
7 to 30. If you select a code below or
above that range, you must wait 1 to
2 seconds after holding down
before you start talking.
AUTO POWER OFF
The radio's built-in timer turns off
the radio if it is idle for 2 hours. Hold
down
while turning on
CHANNEL
the radio to enable or disable the
timer. On or OF (off) briefly appears.
If the timer turns the radio off, OF ap-
pears. Press any button to turn the
radio back on. OF disappears and
the last selected channel appears.
or
PTT
7
Advertisement
Table of Contents
