Table of Contents
Advertisement
Operating Instructions
What to do, when ...
Try to rectify minor faults on the dishwasher with the aid of the
instructions given here. If you call in customer service to resolve one of
the malfunctions listed here, or rectify an error made in the operation
of the appliance, the customer service engineer's visit is not free of
charge, even during the period of guarantee.
...Error messages are displayed.
If any of the indicators in the control panel, as listed in the table below,
are flashing or are illuminated, you can probably rectify the fault
yourself.
Malfunction
The cycle indicator for the
selected dishwashing cycle is
flashing, The WATER indica-
i
tor
is continuously illu-
minated, error code
displayed in the multi-dis-
play: There is no water run-
ning into the dishwasher.
The cycle indicator for the
selected dishwashing cycle is
flashing, error code
displayed in the multi-display.
Error code
in the multi-display.
36
The tap is blocked or furred
with lime-scale.
The tap is turned off.
The filter (where present) in
the threaded hose fitting at
the water inlet valve is blok-
ked.
Å 10
is
Filters in the base of the
washing compartment are
blocked.
The water inlet hose has not
been correctly laid.
The siphon is blocked.
The water drain hose has
Å 20
is
not been correctly laid.
Å 30
is displayed
The leak prevention system
has been triggered.
Possible cause
Remedy
Clean tap.
Turn the tap on.
Clean the filter in the
threaded hose fitting.
Press the button for the
commenced dishwa-
shing cycle; then abort
the dishwashing cycle
(see chapter: "Starting a
dishwashing cycle");
clean out the filters (see
chapter: "Cleaning the
filters").
Check hose installation.
Clean out siphon.
Check hose installation.
Turn off the tap and
contact customer ser-
vice.
Hide quick links:
Advertisement
Table of Contents
