Vantec NexStar MX User Manual page 9

(4) Secure the hard drive onto
the drive caddy with the
provided screws.
(5) Choose the Mode Configuration
for the NexStar MX. Connect the
power adapter and power on the
unit. Press the reset button and
hold for 5-7 seconds.
*For Mode Configuration details,
see page 9. ( figure 5.1-E )
(6) Insert the drive caddy back into
the aluminum housing. Be sure to
align and secure with the provided
screws.
( figure 5.1-F )
( figure 5.1-D )
Installation
( figure 5.1-D)
( figure 5.1-E)
( figure 5.1-F)
7