Installation - Vantec NexStar MX User Manual

5.Installation:

Dual 3.5" RAID Enclosure w/Fan USB 3.0 & eSATA Interface
5.1.Hardware Installation:
Installing the hard drive:
(1) Release the four screws then
pull out the rear panel and tray
of the NexStar MX.
( figure 5.1-A )
(2) Place the first HDD onto the
drive caddy then insert the HDD
into the SATA connector.
( figure 5.1-B )
(3) Place the second HDD onto the
drive caddy then insert the HDD
into the SATA connector.
( figure 5.1-C )
( figure 5.1-A )
( figure 5.1-B )
( figure 5.1-C )
Installation
6