Storing Caller Id Or Redial Numbers; Chain Dialing From The Phonebook - Plantronics CT14 User Manual

Phonebook
Storing Redial or Caller ID Numbers in the Phonebook
You can store redial numbers or Caller ID records in the phonebook so you
can use them later.
Go to the Caller ID or Redial list and select the number you want to store.
If the Caller ID information did not include the number, then you will not be able
to store it.
1
With the phone in standby, press
to open the redial list.
2
Use and
numbers. When you come to the number you want to store, press
3
Select Store into PB (phonebook). Edit Name appears.
4
Add the name and press
5
Edit number (if needed) and press
NOTE If the phone number is already stored in memory, you will hear a beep, and
This data is already saved! appears in the display. The number will not be stored.

Chain Dialing from the Phonebook

If you often have to enter a series of digits or a code number during a call, you
can save that code number to a phonebook entry.
When your call connects, just use the phonebook to transmit the saved code
number. This is referred to as chain dialing.
1
Enter the code number (up to 20 digits) into the phonebook.
See Creating Phonebook Entries on page 16.
Be sure to enter the code number into the phonebook exactly as you
would enter it during a call.
2
During a call, when you hear the prompt that tells you to enter the
code number, press
3
Use or
that contains the digits you want to send, and press
The phone sends the digits of the code number exactly as you saved them
in the phonebook entry.
20
to scroll through the Caller ID records or redial
.
.
to select the phonebook entry
to open the Caller ID list or
.
.
.