Connections; Connecting To A Tv - NAD T 532 Owner's Manual

Connections

Tips
Depending on your TV and other equipment you wish
to connect, there are various ways you could connect
the player. Use only one of the connections
described below.
Please refer to the manuals of your TV, VCR, Stereo
System or other devices as necessary to make the
best connections.
For better sound reproduction, connect the player's
AUDIO OUT jacks to the audio in jacks of your
amplifier, receiver, stereo or audio/video equipment.
See "Connecting to optional equipment" on page 10.
Caution
– Make sure the DVD Player is connected directly to the
TV. Tune the TV to the correct video input channel.
– Do not connect the DVD Player's AUDIO OUT jack to
the phono in jack (record deck) of your audio system.
– Do not connect your DVD Player via your VCR. The
DVD image could be distorted by the copy protection
system.

Connecting to a TV

Make one of the following connections, depending on
the capabilities of your existing equipment.
When using the SCART's RGB signal, set the Video
Output Select switch to SCART/RGB. When using
the S-VIDEO OUT jack, set the Video Output Select
switch to S-VIDEO.
Video connection (Good)
Connect the VIDEO OUT jack on the DVD Player to
1 1
the video in jack on the TV using the video cable
supplied (V).
Connect the Left and Right AUDIO OUT jacks of
2 2
the DVD Player to the audio left/right in jacks on the
TV (A) using the supplied audio cables.
S-Video connection (Better)
Connect the S-VIDEO OUT jack on the DVD Player
1 1
to the S-Video in jack on the TV using an optional
S-Video cable (S).
Connect the Left and Right AUDIO OUT jacks of
2 2
the DVD Player to the audio left/right in jacks on the
TV (A) using the supplied audio cables.
SCART connection
Connect the SCART/RGB OUT jack on the DVD Player
to the corresponding in jacks on the TV using the scart
cable (T).
Note
For using SCART's RGB signal, set the Video Output
Select switch to "SCART/RGB".
Rear of TV
S-VIDEO
COMPONENT VIDEO INPUT
INPUT
Pr Pb
S C
DIGITAL
OUT
S-VIDEO
COMPONENT
VIDEO
OPTICAL
OUTPUT
Rear of DVD player
Note
If the TV has an S-video input, connect the DVD player
with the S-video cable. When using an S-video cable,
do not connect the yellow video cable.
VIDEO
AUDIO INPUT
INPUT
Y
L R L
A V
DIGITAL AUDIO
COMPONENT
OUT OUT
VIDEO OUT
Pr
COAXIAL L
Pb
R
Y
S-VIDEO
VIDEO
OUT
OUT
9