Table of Contents
Advertisement
Click to enable the Virtual Server
Use Rule#
You can enable your virtual server for certain periods of time by assigning it
a Rule #. You must first set up the appropriate Scheduling Rule. See
Schedule Rule and Schedule Rule Setting Pages
information.
For example, if you have an FTP server (port 21) at 192.168.1.5, a Web server (port
80) at 192.168.1.6, and a game that requires port 5000 to be open at 192.168.1.7,
then you need, at minimum, to specify the following mapping.
ID
Service Port
1
21
2
80
3
5000
The Port Triggering Page
Port triggering opens an incoming port when your computer is using a specified
outgoing port for specific traffic. This provides a way for you to automate setting up a
Virtual Server with some applications. You can use the Port Triggering page to
configure which packets are allowed access.
Trigger
The outbound port number used by the application.
Chapter 5: Using the Configuration Manager's Advanced Program
Server IP
192.168.1.5
192.168.1.6
192.168.1.7
The
on page 67 for more
Enable
Yes
Yes
Yes
51
Hide quick links:
Advertisement
Table of Contents
