Amino remote AmiNET530 remote control control Switching on or off Controlling a TV Inserting batteries Using the remote to Controlling the DVD Childproof feature control the AmiNET530 Using the remote Important information control to control a TV about using batteries...
Page 4 Setting up the Amino remote control This section explains how to unpack and set up the Amino remote control. Your service provider may have supplied an alternative remote control, in which case please refer to the User Guide supplied by your service provider for instructions on setting up and using the remote control.
Remote Control User Guide 14/11/07 1:36 pm Page 5 Childproof feature You can optionally secure the battery compartment with the screw provided to prevent children from opening the compartment: • Remove the battery cover as described above, and using a suitable screwdriver remove the silver screw at the base of the remote control: •...
STB mode. Switching on or off To turn the AmiNET530 on or off: • Press the power button on the Amino remote control. When the AmiNET530 is switched on the status light on the front panel is on.
Page 7
1:36 pm Page 7 Using the remote to control the AmiNET530 In Set-Top Box (STB) mode, the remote can control the following functions of the AmiNET530: Note! This only applies to the remote control illustrated below. If your service provider has...
Remote Control User Guide 14/11/07 1:36 pm Page 8 Configuring the remote control In order for the remote to transmit the correct signals to control the TV/DVD, the remote must be programmed with a code corresponding to the type of TV in use. Below is a set of instructions for programming TV codes into the remote.
Remote Control User Guide 14/11/07 1:37 pm Page 9 Controlling a TV To control the TV press the TV button on the remote control. The TV mode–select button will light for one second to indicate that the mode has been set. When any valid function button on the remote is pressed, the TV button will light to indicate that a command is being transmitted in TV mode.
Page 10
Remote Control User Guide 14/11/07 1:37 pm Page 10 Using the remote control to control a TV In TV mode, the remote can control the following TV functions: Switch on or off the TV power* * All TVs will power off with this button. Some TVs will switch on when the power button is next pressed and other TVs will only Select TV mode power on when a channel button or channel +/- is pressed.
Need help?
Do you have a question about the AmiNET530 and is the answer not in the manual?
Questions and answers