Gigabyte Intel Pentium 4 Processor Motherboard GA-8VM800M User Manual page 64

A. Create Array:
Press Enter on Create Array item, you will see the screen as shown below.
Auto Setup For Performance
Array Mode RAID 0 (Striping)
Select Disk Drives
Block Size 64K
Start Create Process
Channel Drive Name
Serial_Ch0 Master ST3120026AS
Serial_Ch1 Master ST3120026AS
Before create an Array, you have to set the array mode first. Select Array Mode and press Enter, use the
arrow key to select the array mode. The options are: RAID 0 for performance, RAID 1 for data protection,
and RAID SPAN for capacity.
Auto Setup For Data Security
RAID 0 for performance
Array Mode RAID 0 (Striping)
RAID 1 for data protection
Select Disk Drives
RAID SPAN for capacity
Block Size 64K
Start Create Process
Channel Drive Name
Serial_Ch0 Master ST3120026AS
Serial_Ch1 Master ST3120026AS
GA-8VM800M Motherboard
VIA Tech. VT8237 SATA RAID BIOS Ver 2.31
Create a RAID array with
the hard disks attached to
VIA RAID controller
F1
,
Enter : Confirm the selection
ESC
Array Name
VIA Tech. VT8237 SATA RAID BIOS Ver 2.31
Create a RAID array with
the hard disks attached to
VIA RAID controller
F1
,
Enter : Confirm the selection
ESC
Array Name
- 64 -
: View Array/disk Status
: Move to next item
: Exit
Mode Size(GB) Status
SATA 111.79 Hdd
SATA 111.79 Hdd
: View Array/disk Status
: Move to next item
: Exit
Mode Size(GB) Status
SATA 111.79 Hdd
SATA 111.79 Hdd