Frequency / Voltage Control - Gigabyte Intel Pentium 4 Processor Motherboard GA-8VM800M User Manual

2-7

Frequency / Voltage Control

CPU Clock Ratio (Note)
Auto Detect PCI/DIMM Clk
Spread Spectrum
CPU Host Clock Control
x CPU Clock
DRAM Clock
DIMM OverVoltage Control
: Move Enter: Select
F5: Previous Values
Incorrect using these features may cause your system broken. For power end-user use only.
CPU Clock Ratio
(Note)
This setup option will automatically assign by CPU detection.
The option will display "Locked" and read only if the CPU ratio is not changeable.
Auto Detect PCI/DIMM Clk
Enabled
Disabled
Spread Spectrum
Enabled
Disabled
CPU Host Clock Control
Note: Please note that if your system is overclocked and cannot restart, please wait 20secs.
for automatic system restart or clear the CMOS setup data and perform a safe restart.
Disabled
Enabled
CPU Clock
This option is available only when CPU Host Clock Control is enabled. The adjustable range is
dependent on the CPU you install.
If you use a Pentium 4 processor with 533MHz FSB, please set "CPU Clock" to 133MHz. If you
use a Pentium 4 processor with 800MHz FSB, please set "CPU Clock" to 200MHz.
Incorrect using it may cause your system corrupted. For power users only!
(Note) This item will show up when you install a processor which supports this function.
CMOS Setup Utility-Copyright (C) 1984-2005 Award Software
Frequency/Voltage Control
[21X]
[Enabled]
[Enabled]
[Disabled]
100MHz
[By SPD]
[Auto]
+/-/PU/PD: Value
F6: Fail-Safe Defaults
Detect the PCI/DIMM clock automatically. (Default value)
Disable this function.
Enable clock spread spectrum. (Default value)
Disable this function.
Disable CPU Host Clock Control. (Default value)
Enable CPU Host Clock Control.
- 39 -
Menu Level
F10: Save ESC: Exit
F7: Optimized Defaults
Item Help
F1: General Help
BIOS Setup