Table of Contents
Advertisement
M
Because there can be a difference in the effectiveness of HLC according to the amount of light
area in the screen, optimize the installation angle for the best HLC performance.
When dark, the HLC is only activated when a bright light exceeding a specifi c size. (In NIGHT
ONLY mode).
The HLC is not activated in day light or when bright light is not present at night. (In NIGHT ONLY
mode).
Using the WDR function, select the shutter mode can be either fi xed or A.FLK in the DC and Video
lens. And in the manual lens, select the shutter mode can be only ESC.
If you select the WDR, the following problems may occur depending on the lighting condition. So,
deactivate it if not necessary.
1)
In the case colors are unnaturally changed and the screen is unnaturally displayed.
2)
In the case a noise in the bright part of the screen occurs.
If you increase LIMIT, the screen display may be distorted.
If you use the VPS (Virtual Progressive Scan) function, the CCD reads differently so you can not use
WDR simultaneously. If you set VPS to ON, WDR will be automatically set to FIXED Mode.
The use of a DC lens than the manual lens is recommended to WDR optimal performance.
The D-ZOOM (Digital Zoom) and DIS (Digital Image Stabilization) functions are disabled if HLC
(Highlight Compensation) is enabled. (Set to "---".)
SSNR3
This function reduces the background noise in a low luminance environment.
1.
When the SETUP menu screen is displayed,
select 'SSNR3' by using the Function Setup
button so that the arrow indicates 'SSNR3'.
2.
Select a desired mode using the Function
Setup button.
ON : Activates SSNR3 so that noise is reduced.
OFF : Deactivates SSNR3. Noise is not reduced.
3.
Set the SSNR3 mode to 'ON' and press the
set button. Then you can adjust the noise
reduction level.
M
You cannot set the SSNR3 to 'ON' or 'OFF' when the AGC mode of the 'EXPOSURE' menu is 'OFF'.
When adjusting the noise reduction level in the SSNR3 mode, remember that the higher the level set,
the more the noise level will be reduced, as will the brightness of the image.
MAIN SETUP
1. LENS
DC
2. EXPOSURE
3. WHITE BAL
ATW
4. BACKLIGHT
OFF
5. SSNR3
ON
6. DAY/NIGHT
AUTO
7. PROFILE
BASIC
8. SPECIAL
9. EXIT
SAVE
English_29
Advertisement
Table of Contents
