Accessories; Battery Charger; Data Cable - Vertu CONSTELLATION V User Manual

Accessories

Battery charger

The wall charger supplied with your phone should be suitable for your region. However, you should
always check that the electrical rating of the AC outlet is appropriate for the charger before you attempt to
plug it in.
The battery for your Constellation V requires charging at regular intervals. The battery does not have to
be completely discharged before you can charge it.
For information on how to charge your phone, see "Charge the phone" on page 13.
Other charging options
You can also charge the battery by using:
A compatible PC (this method also provides data connectivity)
l

Data cable

The USB data cable enables you to transfer data between your Constellation V phone and a compatible
computer.
Note: Two microUSB cables are supplied: one microUSB cable 1200 mm (CA-209DV) and one
microUSB cable 250 mm (CA-210DV).
1. Connect the USB data cable to the microUSB connector of your Constellation V. Make sure the
cable is inserted correctly, with the USB symbol facing up.
2. Connect the cable to a USB port of the computer. The phone starts charging, and a number of
USB connection modes are available. Drag the status and notification bar down to select from the
following options:
Media device (MTP) — to transfer media files between your phone and a PC.
Camera (PTP) — to transfer photos, and any other file types not supported by Media device
(MTP), between your phone and a PC.
© 2013 Vertu Corporation Limited. All rights reserved.
Accessories
77