Table of Contents
Advertisement
8 Channel Audio Setup
To achieve 8-Channel Audio, you have to connect the front panel audio module to the F_AUDIO
connector on the motherboard. Then select the type of equipment from the pop up menu. Note that the
audio module should be the HD (High Definition) specification.
STEP 1 :
After installation of the audio driver, you should find
an Audio Manager
icon in your system tray (you
can also find the icon in Control Panel). Double-
click the icon to open the Audio Control Panel.
STEP 2:
In the Audio Control Panel, click the Audio I/O tab.
In the upper left list, click 8CH Speaker.
STEP 3:
After plugging in 8-channel speakers, a small
window will pop up and ask you what type of
equipment is connected.
Choose a device depending on the type of speaker
connected (8-channel audio consists of Front
Speaker Out (Line Out), Rear Speaker Out,
Center/Subwoofer Speaker Out, and Side Speaker
Out) then click OK. The 8-channel audio setup is
completed.
GA-K8N51PVM9-RH-NV Motherboard
- 84 -
Advertisement
Table of Contents
