Table of Contents
Advertisement
3-6
Dual-Monitor Setup
To setup a Dual-Monitor system, you have to pre-
pare one 15-pin VGA monitor and one DVI-D monitor.
Then connect the VGA monitor to the VGA port and
the digital monitor to the DVI-D port in back panel of
the motherboard.
DVI-D Monitor
15-pin VGA Monitor
After installation of the drivers, you can set the
display to output from two monitors on the nView
Display Settings page.
To access the nView Display Settings page,
right-click on Desktop and select Properties. Then
select the Settings tab and click the Advanced
button.
After pressing the Advanced button in settings,
you'll see the Plug and Play Monitor and NVIDIA
Business Platform dialog box. Click the NVIDIA
Business Platform tab. In the left list, click nView
Display Settings.
In the nView Display Settings properties, select
the dual-monitor modes from nView Display
Mode.
GA-K8N51PVM9-RH-NV Motherboard
- 52 -
Advertisement
Table of Contents
