Safety
Make sure vents are not blocked to avoid overheating.
•
Do not stare into the lens while the projector is projecting as the light is very
•
bright.
Change lamp after 2,000 hours of use, or catastrophic failure of the lamp can
•
result.
Do not use projector when it is tilted toward either vent side. This can result in
•
significantly reduced lamp life.
Be careful lifting the projector due to its weight.
•
Feature Identifier
Features, as labeled above:
1. Infrared receiver for Digitarium Alpha projector remote control
2. Projection lens
3. DVD drive
4. Video-in port
5. Audio jack
6. Ethernet jack
7. Reset button
8. Indicator light
9. AC power jack and switch
10.Infrared receiver for DLP projector remote control
11.Lens cap (hanging on retention cord)
12.Lamp access door
Digitarium Alpha User Manual 5