Table of Contents
Advertisement
• This product is intended for indoor use, and works best indoors. We do not
recommend using the product outdoors.
y your helicopter in a cluttered space. This helicopter was
intended for obstacle free wide area spaces.
• Make sure all people and animals are 3-5 feet from the helicopter before you
ying it.
crash anywhere on or near any other people or animals.
• The rotating parts on the helicopter could lead to injury. Never put any body
part including the hands and face, close to the rotating parts. Only
operate this product standing, as it allows for quick movement away from
the helicopter if necessary.
• Never operate the helicopter using parts that are altered in shape or
damaged in any form.
•Make sure you use new or fully charged batteries in the controller.
• Do not try to crash or drop the helicopter, as it may cause damage.
Troubleshooting:
For best results, do not use batteries with power strip indicators (such as
Duracell Ultra Power batteries and Duracell Ultra Advanced with a
Powercheck). Should you wish to continue to use these batteries, please be
sure that all power strips are facing forward when placed in the battery
compartment. In some cases, it may also help to remove, reinsert and push
the batteries forward ensuring proper contacts are being made. If batteries
have been installed correctly, the Red LED light on the remote control will
begin to blink once you turn the remote ON/OFF switch to the ON position.
Problem
Helicopter is not
Reset band selection
responding to remote
on the remote.
Remote is not turning on
Batteries are not making
contact with battery leads
in the remote.
Cause
Select a frequency Band. Press throttle all the way
up and all the way down to set.
Remove and reinstall the batteries being certain
they are installed in the right direction and
making proper contact with the battery leads.
7
y/land/or
Correction
Advertisement
Table of Contents
